Descripton Schematic Dimensions Technical data |
||
Predecessor TS400 Operator module BIAS 400 |
Description
The TS400 BIAS 832.700.400 had been replaced by the new TS400-DM Operator module serial 832.700.420The BIAS 400 module is the man to machine interface in the TS-400 system. All status- or alarm messages appear in plaintext. The integrated acoustic alarm also activates when an alarm arises. The function keys can be use to acknolwledge alerts, set time and brightness and to access a log file for the previous 1000 events.
Up to 16 BIAS 400 modules can be integrated into one system. The messages can be assigned selectively. The BIAS 400 module is connected to the CPU's serial interface or to the Technet unsing a LAN-modem (Lan to serial adapter).
Thanks to its flat design, the display and operator module can be mounted directly on front panels, walls or to the work surface via a monitor stand.
Connections
Connection diagram BIASThe BIAS 400 uses the same wire assignment as the Power over Ethernet Technology. Therefore, only one cable is necessary to connect the BIAS 400. Please make sure that the used cables are fully equipped and not crossed. PIN 6 must not be used.
Pin | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
Description | TX | RX | GND (5V) | 24V+ | 24V+ | 5V+ | GND (24V) | GND (24V) |
Used for | Signal | Signal | Signal | Supply | Supply | Empty | Supply | Supply |
Connection Principle BIAS 400
The BIAS 400 can be integrated in the TS400 annunciator system in two ways:
-Local directly connected to the CPU's serial interface. An adapter for the power supply has to be connected
-External integrated in the network (Technet) using a LAN-modem, also in this case, an adapter for the power supply has to be connected
Dimensions
Technical data
Type | BIAS 400 operator module serial |
---|---|
Image | |
Part number | 832.700.400 |
Display | LCD 16 lines x 30 characters, backlit, supports graphics |
Connection | Network cable |
Temperaures Operating Storage |
0 to +55 °C -20 to +75 ° |
Housing | Anodized aluminium |
Mounting | -cabinet front 114x163mm M4 -monitor stand VESA 75x75mm -wall bracket VESA 75x75mm |
Protection category | IP 40 |
Power | 8W |
Supply Voltage | 24VDC |
Dimensions (B x H x T) | 250 x 175 x 24 |
Weight | 1320 g |