 |
 DescriptionViewSchematicTechnical dataDownloads |
|
| TS200 IM 24 input module | ||
Description
The IM 24 input module has eight digital inputs each having an input voltage of 24V DC. An input module always forms the beginning of a node. The node is addressed at the input module. The digital inputs are wired on a 10 pole terminal block. All inputs have a common 0V connection (GND) and are galvanically isolated from the logic of the module.View
(1) labelling strip (node number)(2) Green LED lights when UB (24V DC bus) OK
(3) Green LED lights when UL (5V DC logic) OK
(4) Green LED lights when bus communication (BUS) OK
(5) DIP switch for addressing and transfer rate at the bus
(6) bus connection with integrated supply (UB, 24V DC)
(7) no (LED) function
(8) terminal socket houses terminal blocks
(9) Green LED lights when input active
(10) labelling strips (input channels)
(11) connector plug for IE/OE extension modules
Schematic
Technical data
| Digital inputs (IEC1131-2) Input voltage: Signal = 0 Signal = 1 Limits Input current (at +24 VDC) Input resistor Connecting cable for sensor Shielding |
8 0 VDC NOM (< +5 VDC) +24 VDC NOM (> +14 VDC) -36 .. +36 VDC 6 mA typ. 3.9 kOhm max. 100 m not required |
| Bus connection |
CAN (ISO 11898) |
| UB power supply Operation range Limits Power consumption: Without IE / OE Full configuration |
+24 VDC NOM +18 .. +36 VDC -36 .. +36 VDC max. 2.1 W max. 9 W |
| Electrical isolation Supply / Logic and bus Inputs / Logic and bus Inputs / Inputs |
yes yes no |
| Ambient temperature Operating Storage |
0 to +55 °C -25 to +70 ° |
| Protection category |
IP 40 |
| Dimensions (W x H x D) in mm | 100 x 58 x 85 |
| Weight
|
220 g |