 |
 DescriptionViewTechnical dataDownloads |
|
| TS200 CPU processor module | ||
Description
The CPU processor module is the command centre for the TS200 Fault monitoring system. It receives and processes data and sends such data to other units. The CPU is currently available in two memory versions. The size of the memory dictates the maximum possible expansion of the system.View
The following is located on the front of the CPU:(1) Function indicators via LEDs
(2) SL1 and SL2 card slots
(3) DIP switch bus configuration
(4) Terminals for outputs (O) and supply (0 V, US)
(5) Service port (D-Sub-9)
(6) Battery compartment
The following is located on the reverse side of the CPU:(7) printer port (D-Sub-9)
(8) bus connection (D-Sub-9)
Technical data
| Main memory RAM Flash-EPROM |
256 kB / 1 MB 512 kB / 1 MB |
| Processing capacity I /O-channels I/O-nodes Control modules |
256 / 1280 4 / 20 7 / 7 |
| Real time clock Max rate variation (at 25 °C) |
yes 6 sec/day |
| Digital outputs (device fault) ) Output type Display Output status Signal level without load Signal = 0 Signal = 1 Signal = 1, I = 0.1 A, US = 24 VDC Output current (signal = 1), Short circuit current Total loading capacity Minimum switching current Inductive cut-off voltage limitation Consequences of overloading |
2 (continuous and flashing) FET, positive-switching LED, orange (signal = 1) max. +2 VDC +18 .. +36 VDC max. +22 VDC max. 0.1 A typ. 0.5 A 0.2 A 100 A Self induction recuperation diode Current limiting and temperature cut-off |
| Serial interfaces |
Printer (X2), service (X1) |
| Bus connection | CAN (ISO 11898) |
| US power supply operating range limits power consumption |
24 VDC NOM +18 to +36 VDC -36 to +36 VDC max. 6 W |
| Electrical isolation Feed / logic, bus Output / logic, bus Serial connection / logic, bus Output / output Feed / output |
yes yes yes no no |
| Ambient temperature Operating Storage |
0 to +55 °C -40 to +80 ° |
| Protection category |
IP 30 |
| Dimensions (W x H x D)in mm | 181 x 70 x 132 |
| Weight |
695 g |