		Description Technical data Schematic Order overview Downloads
Annunciator system LSX

LSX Description

LSX, the modular annunciator system certified to DIN 19235 with new- or first-up value indication. Faults are indicated using the LED display on the CM and IM. An analogue- or GSM modem or a log printer can be connected to the CM. If a GSM modem is added to the system, status- or fault alerts can be sent via SMS/email or fax, or to a pager. For each LS CM or IM, up to 8 subscribers can be included in an alarm list. The parameters for the units are set via a terminal program. This is already available on all PCs: E.g. 'Hyperterminal' for Windows. The system is modular in design. Individual components can be removed if necessary. The maximum configuration is 256 1/0 with a maximum ring-shaped bus length of 1000m. The system comprises the following three primary components:

LSX CM Communication Module
This module has three integrated buttons for horn- and lamp acknowledgement and lamp test. Each CM also comes with an integrated potential-free collective-, group- and horn output. The alarm LEDs can be labelled using insert strips. A modem (analogue- or GSM),a log printer or a Panelmodule PM can be connected to the CM.

LSX IM Input Module
Add-on module with an additional 8 inputs, identical to the CM, except does not have a communication interface. .

LSX OM Output Module
Output module with 8 freely-programmable relay outputs. The relay status is indicated via the LED on the front of the device. The module also has an integrated lamp test button. The alarm LEDs can be labelled using insert strips.

LSX Panel Modul PM
The panel module PM is used as remote display with 16 channels. It is directly connected to a communication module CM. The panel module PM shows automatically the information from the connected communication module and if installed, the communication- or input module with the next higher bus address.

Technical data

Type	LSX CM Communication Module	LSX IM Input Module	LSX OM Output Module	LSX PM Panel Module
Image
Part number	832.650.020	832.650.010	832.650.030	AS-D16-24-V24
Housing plastic WxHxD	87.5 x 90 x 58mm DIN	87.5 x 90 x 58mm DIN	87.5 x 90 x 58mm DIN	72 x 144 x 74mm
Installation position	any	any	any	any
Connections	Cage clamp terminal blocks 2.5mm²	Cage clamp terminal blocks 2.5mm²	Cage clamp terminal blocks 2.5mm²	Screw terminal max. 1.0mm²
Temperature range	0°C - +55°C	0°C - +55°C	0°C - +55°C	0°C - +65°C
Protection category	IP20	IP20	IP20	IP20
Supply voltage	24VDC +/-20%	24VDC +/-20%	24VDC +/-20%	8-30VDC / 12-28.5VAC, 40-80Hz
Flashing frequency	1Hz	1Hz	1Hz	1Hz
Relay switching capacity	max. 3A / 250VAC	max. 3A / 250VAC	max. 3A / 250VAC	--
Max. power consumption	5W	5W	3W	3W
Trip delay	approx. 10ms	approx. 10ms	approx. 10ms	approx. 10ms
Recovery time	approx. 1s	approx. 1s	approx. 1s	approx. 1s

General info
Maximum bus length: 1000m (line) - required bus cable: U72 1x4x0.8 shielded

Schematic

Basic principle

Connection diagram LSX annunciator

Connection diagram

LSX CM and IM communication modules

Anschlusschema LSX CM

LSX OM output module

Anschlusschema LSX OM

LSX PM panel module

Anschlusschema LSX PM

Order overview

Part number	Image	Description	Shop
832.650.010		LSX IM input module
832.650.020		LSX CM communication module
832.650.030		LSX OM output module
AS-D16-24-V24		LSX PM panel module
832.700.902		Standard modem, GSM dual-band, DIN rail
UCA-AM		Antenna with magnetic base, GSM dual-band with 2m connection cable for GSM modem.
60603032E		GSM station antenna, dual band with 5m connection cable and wall bracket
823.122.018		Extension cable for antenna, 5m with coupling (max. 3 pcs.)
832.600.034		Modem cable/ printer cable
832.600.035		Programming cable
862.332.420		EcoPower PSS 242 230V AC/24V DC 2A power supply unit for DIN rail mounting
832.600.031		BCCS4 Bus cable, 0.2m for connecting modules
832.600.032		CIM bus connection module (interface to building cabling)

LSX Description

Technical data

Schematic

Order overview

Downloads