		Description Technical data Schematic Dimensions Order overview Downloads
Annunciator system TS70

Important information about TS70

The TS70 is discontinued. We recommend using the TS400 TS400

Description

The TS70 annuncitator system is a family of basic modular devices which can be expanded up to 70 digital inputs. Alarms are signalled via a text display and integrated horn. The units are programmed from a PC keyboard. The system comprises the following three primary components:

CM 70 control module
The CM is the control- and display module for the system. In the idle state, the unit displays the time and date. If a fault arises, the text appears in the display and the integrated horn is switched on. The integrated buttons can be used to scroll through the faults to acknowledge each message. An additional log printer e.g. EPSON LX 300 (parallel port) can be connected to the CM.

IOM 2470 Input- output module
The IOM has two system inputs for the external horn- and group acknowledgement. Signal inputs 1 to 6 are also integrated. These lead to the horn-, collective and group output.

IE 2470 Input extension module
The IE 2470 can be connected to extend the system by an additional 32 inputs. Up to two IE 2470 modules can be used.

Diagram TS70

Basic principe TS70 annunciator

Technical data

Type	CM 70 Control module	IOM 2470 Input- output module	IE 2470 Input extension module
Image
Alu housing WxHxD	192 x 48 x 110mm	108 x 80 x 58mm DIN	108 x 80 x 58mm DIN
Front panel cutout	186 x 45mm
Installation position	any	any	any
Connections	Printer Sub-D25/ AT keyboard	Screw terminals	Screw terminals
Supply voltage	12-24VDC	12-24VDC	12-24VDC
Switching capacity, outputs	none	max. 0.5A / 10-30VDC	max. 0.5A / 10-30VDC
Max. power consumption	max. 20W / System	max. 20W / System	max. 20W / System
Internal bus length	maximum 3 meter