		Description View Technical data Download data sheet Downloads Information about the previous version
Annunciator system TS400 Fieldbus controller

Description

The controller is the intelligent upstream starting point of each and every node. Up to 128 nodes can be used in the system. All of these are supplied locally. Each controller is able to manage 64 directly and 250 with the bus extension. This results in up to 2000 digital or 1000 analogue I/Os per node. Please note the maximum I/O consumption of 1700mA which the contoller is able to provide. The WAGO 750-891 is used as basic controller and works with the special APS firmware. In order to support the TS400 Fieldbus controller 832.700.550, the CPU software must be V2.36.20761 or higher. The node can be connected to the WAGO I/O module of the 750 series. This provides a cost-effective range of inputs and outputs in all possible voltage variants.

The nodes are connected via a network cable (min. Cat. 5). The fieldbus controller provides two ethernet interfaces with a switch. This enables a direct connection form node to node or programming access directly on the node. The standard setting of the IP-address DIP-Switch is DCHP.

Application example:

TS400 Controller

View

Technical data

Type	TS400 Fieldbus controller
Image
Part number	832.700.550
Shop
Program memory	4MByte
Minimum CPU software version	2.36.19895
System structure Digital signals analogue signals Max. no. of I/O modules Max. no. of I/O modules with bus extension	2000 (Example with 250 pcs. 8 cannel inputs) 1000 64 255
Supply voltage	24 VDC
Total current for the I/O modules	1700mA (Extensible with the power supply module 750-613)
Temperatures Operating Storage	0 bis +55 °C -25 bis +85 °
Housing	Plastic
Connection	Cage Clamp 2,5mm²
Mounting	35mm DIN rail
Protection category	IP 20
Dimensions (W x H x D)	62 x 72 x 100
Weight	150 g

Description

View

Technical data

TS400 Downloads