We are using cookies on this web site to provide a in order to provide you the best online experience.

More about data procetion, and a link to the inmpressum (both in German).

Technical data
Order overview
Rack Multi Control RMC

RMC Description

The Rack Multi Control, RMC, is a self contained system for supervising network and server racks. The RMC offers 8 digital and 4 analog inputs as well as 3 potential free outputs. The RMC can monitor temperature, humidity, smoke, moisture, intrusion and much more. Also, in combination with a keypad the RMC is able to perform access control to IT-Racks and Server rooms. After you have logged in on the RMC you can monitor the main page of the graphic user interface which is a virtual copy of the RMC. The top part shows the front of the RMC, below it lists the last 15 events. The GUI refreshes every 60 seconds or in case of an event. When an alarm is raised, notification can be sent to 5 recipients by Email or SMS and via SNMP Traps to a network management system.

The RMC was developed to be user friendly, easy to configure and have the ability of communication. The RMC can be attached to the network by Ethernet and configured in a web browser, therefore no additional software is needed. System status and alarm notifications are listed on the main page for easy view. The RMC is made to fit in a 19" cabinet and uses 1 unit size in height.

The RMC is despatched ready to use icluding a temperature sensor 0.2m cable, the connector set, the power cable and the mounting kit.

Technical data

The RMC alarms with 8 Alarm channels with red/green LED
Text display
2x Status LED
Number of delegates for E-mail and SMS-Messaging 5
Inputs 1 Analog / 3 Analog-Temperature / 8 Digital
Relay Outputs 2x 1A / 3x 5A
Housing Steel, Powder coated RAL7035
Connections Pug in screw terminals max. 1,5mm2
Supply voltage 230VAC
max. power consumption 20VA
Protection degree IP40
Temperature range -5°C to +45°C
Dimensions 1U 482.6 mm, (19") Rack mounted 115 mm depht
Weight 2410g



1. Modem Interface RS232
2. Keypad Interface (Emka 2100)
3. Ethernet Port
4. Digitale Inputs
5. Analogue Inputs
6. Alarm and Door Output
7. Output Relays
8. Power Connector

Please click on the image for a larger view or go to the download of the wiring diagram sheet



The programming of the RMC is realized by a browser (Internet Explorer). After selecting the IP address, the login page is shown. The start page shows the actual status of the in- and outputs. Furthermore, the last 15 events are listed in the log section. All settings can now be easily realised under the position "settings".

View: Login


View: Start Page


View: Settings



Please click on the drawing for a larger view.

RMC Serverraumüberwachung

Order overwiev

Part number Picture Description Shop
901-0101 RMC server room security Rack Multi Control inclusive power cable, connectors, temp. sensor RMC 0.2 m, installation set
901-0120 RMC server room security Temperature Sensor RMC 0.2 m
901-0121 RMC server room security Temperature Sensor RMC 3 m
SWM5 Voice agent alarmmelder Water/Oil sensor 5mm with 5m cable, 1 relay contact NC 24VAC/DC
901-0109 RMC server room security Magnetic door contact
901-0126 RMC server room security Installation Set: 4 screws/nuts