Description Programming Technical data Schematic Dimensions Order overview Downloads Link to predecessor model AS-D16
Operation-/Fault indicator LSE-D16

LSE-D16-BS Description

Funtion

The LSE-D16-BS is an operation/fault indicator with 16 channels for front assembly.
It includes integrated controls for horn acknowledgment, alarm acknowledgment and lamp test.
The built-in buzzer can be turned off. Each input (operation and fault input) can be switched separately between an opening contact and a closing contact.
A time delay can be activated collectively for all fault inputs. The indicator process of the fault can be choosen between new value or first-up indication.
The automatic alarm acknowledgment after energising the unit is activatable. It is also selectable if the operation LEDs shall be shown or suppressed during a fault condition.
The LSE-D16-BS has three potential free relay outputs which are defined as horn output until horn acknowledgement, common output and lamp test in the factory settings.
The output function can be changed with the programming to 'horn acknowledgement activated during keystroke on HQ', 'lamp acknowledgement activated during keystroke on LQ' and 'collective output priority 2'. The labelling is simply done with slide-in paper strips.
The connection is done using the plug-in screw terminals on the back of the unit.

System Integration

In addition to its function as a local operation/fault indicator, the LSE-D16-BS can be integrated into higher-level systems.
The connection is established via the network, and depending on the application, an outgoing internet connection may be required.
The LSE-D16 can be used as a universal input module for IoT systems and PLC controllers via MQTT or Modbus UDP.
The LSE-D16 also supports the APSdg protocol and can function as an I/O module for the APS Alert Cloud AAC and the APS TS400 alarm server.
Remote access and maintenance are ensured at no additional cost via the APS TribeRelay connection.





The LSE-D16 operation/fault indicator is the replacement for the AS-D16 . The functionality and size are identical

LSE-D16-BS Programming

The programming of the LSE-D16-BS is carried out either with the web interface or the buttons in the front of the unit.

View of the programming in the WEB interface:


The use of the web interface is described in a separate documentation, see Downloads


The parameterisation with the buttons on the front panel of the LSE-D16-BS has 6 programme levels:

1. Fault indicator inputs (red): Opening contact/closing contact switchover
2. Operating inputs (green): Opening contact/closing contact switchover
3. Virtual DIP switch: time delays, buzzer on/off, automatic acknowledgement and output modes
4. Activation of the LT output as common output priority 2
5. RGB colour setting of the fault inputs
6. RGB colour setting of the operation inputs

Levels 4 to 6 are deactivated when delivered. They can be activated in level 3 with DIP switch 16.

Technical data

Schematic

Dimensions

Order overview

	Artikelnummer	Bezeichnung	Zusatz	Bestand*1	Preis*2
	LSE-D16-BS	Betriebs-/Störmelder 24V DC/AC	2x 16 Eingänge, Multicolour-LED	5	485.00 CHF

Downloads