		Description Time setting Technical data Table of comparison Schematic Dimensions Order overview Downloads
VG on delay relay

Description

The VG on delay relay allows you to apply an activation delay for relays, contactors, solenoid valves and consumers quickly, simply and with minimal wiring. The VG does not require any additional power supply. It is wired in series to the consumer, making it cheap to retrofit existing systems. The time range for the delay is between 0.09 seconds and 40 minutes. The VG on delay relay is designed for two time ranges between which can be switched using a jumper. There are four different variants available, covering the voltage range from 24 to 230VAC/DC. The device can be operated using AC voltage or unfiltered or partially filtered DC voltage after the rectifier bridge.

The VG on delay relay is the ideal solution for:
Raising and lowering shutters and net curtains
Staggered activation of light groups in order to avoid peak current
Activation delay for all relays and contactor control

Time setting

It takes three steps to set the time. The selection is made using a wire jumper between clamps 3 and 4. The time range is set using the three DIP switches. Fine adjustments are made with the adjustment wheel on the front of the device.

Technical data

Load	Minimum	Maximum
Bei 24V	2.4kΩ	48Ω
Bei 36V	3.6kΩ	72Ω
Bei 48V	4.8kΩ	96Ω
Bei 60V	6.0kΩ	120Ω
Bei 110V	11.0kΩ	220Ω
Bei 220V	22.0kΩ	440Ω

General
On delay	0.09s to 40min
Voltage VG024	20-30VAC/DC
Voltage VG060	29-72VAC/DC
Voltage VG110	88-175VAC/DC
Voltage VG230	175-250VAC/DC
Frequency	40-60Hz
Temperature range	-20 to +50°C
Accuray	+/- 0.5%
Reactivation	≤ 50ms after time lapse
Reactivation time	≤ 200ms during time lapse
Duty-cycle	100%
Voltage drop	< 4V after time laps (cl. 1+2)
Peak voltage	600V constant / 1000V 50µs
Leakage curent	< 4mA
Mounting	DIN top-hat rail 35mm
Mounting position	Any
Connections	1,5mm²
Weight	65g
Dimensoins (BxHxT	) 7.5x95x58mm including DIN catch
Dimensions (BxHxT)	7.5x90x58mm without DIN catch
Protection degree	IP20

Table of comparison

The following table shows which new versions are replacing the old VG timers

Old VG99 version		Replacement
Old part number	Old type	New part number	New type
825.005.0001	VG99.024	VG024	VG on delay relay VG024
825.005.0002	VG99.060	VG060	VG on delay relay VG060
825.005.0003	VG99.110	VG110	VG on delay relay VG110
825.005.0004	VG99.220	VG230	VG on delay relay VG230
Old VG100 version		Replacement
Old part number	Old type	New part number	New type
825.006.0001	VG100.024	VG024	VG on delay relay VG024
825.006.0002	VG100.060	VG060	VG on delay relay VG060
825.006.0003	VG100.110	VG110	VG on delay relay VG110
825.006.0004	VG100.220	VG230	VG on delay relay VG230
Old VG101 version		Replacement
Old part number	Old type	New part number	New type
825.007.0001	VD101.024	VG024	VG on delay relay VG024
825.007.0002	VG101.060	VG060	VG on delay relay VG060
825.007.0003	VG101.110	VG110	VG on delay relay VG110
825.007.0004	VG101.220	VG230	VG on delay relay VG230

Schematic

Please click on the image for a larger view or go to the download of the wiring diagram sheet

Dimensions

Please click on the image for a larger view

Order overview

Artikelnummer	Bezeichnung	Zusatz	Bestand^*1	Preis^*2
VG024	Einschaltverzögerung VG 24VAC/DC	20-30VAC/DC , 0.06s - 40min.	30	79.00 CHF
VG060	Einschaltverzögerung VG 60VAC/DC	29-72VAC/DC , 0.06s - 40min.	19	79.00 CHF
VG110	Einschaltverzögerung VG 110VAC/DC	88-175VAC/DC , 0.06s - 40min.	10	79.00 CHF
VG230	Einschaltverzögerung VG 230VAC/DC	175-250VAC/DC , 0.06s - 40min.	44	79.00 CHF

^*1: Lagerbestände sind Richtwerte. Die Zuteilung erfolgt nach Bestelleingang.

^*2: Preise sind nicht verbindlich, Irrtum ist vorbehalten.