Feldbuscontroller
 Description
View
Technical data
Download data sheet
Downloads
Annunciator system TS400 Fieldbus controller





Description

The controller is the intelligent upstream starting point of each and every node. Up to 128 nodes can be used in the system. All of these are supplied locally. Each controller is able to manage 64 directly and 250 with the bus extension. This results in up to 2000 digital or 1000 analogue I/Os per node. Please note the maximum I/O consumption of 1700mA which the contoller is able to provide. The WAGO 750-881 is used as basic controller and works with the special APS firmware. The node can be connected to the WAGO I/O module of the 750 series. This provides a cost-effective range of inputs and outputs in all possible voltage variants.

The nodes are connected via a network cable (min. Cat. 5). The fieldbus controller provides two ethernet interfaces with a switch. This enables a direct connection form node to node or programming access directly on the node. The standard setting of the IP-address DIP-Switch is DCHP.




Application example:

TS400 Controller


View


TS400 Controller


Technical data

Type TS400 Fieldbus controller
Image
Part number 832.700.500
Program memory 1024kByte
System structure
Digital signals
analogue signals
Max. no. of I/O modules
Max. no. of I/O modules with bus extension
2000 (Example with 250 pcs. 8 cannel inputs)
1000
64
255
Supply voltage 24 VDC
Total current for the I/O modules 1700mA (Extensible with the power supply module 750-613)
Temperatures
Operating
Storage
0 bis +55 °C
-25 bis +85 °
Housing Plastic
Connection Cage Clamp 2,5mm2
Mounting 35mm DIN rail
Protection category IP 20
Dimensions (W x H x D) 62 x 65 x 100
Weight 160 g





TS400 Downloads