TS200
 Description
View
Technical data
Downloads
TS200 CM control module





Description

The CM control module is the man to machine interface in the TS-200 system. It has both a visual and acoustic output and is entry ready for operator use and configuration. Operators use the buttons on the front of the unit The system is configured using an AT keyboard.




View

The graphic shows the front of the CM control module with its 4-row liquid crystal display and 5 user pushbuttons. These have pressure points which safeguard against being pressed accidentally. To assist users, the buttons next requiring activation in the alarm procedure are backlit.


TS200 CM (1) Acoustic alarm acknowledgement (horn acknowledgement)
(2) Single acknowledgement
(3) Double acknowledgement
(4) Go up a row
(5) Go down a row
(6) Assembly frame
(7) Liquid crystal display, 8 rows, each with 40 characters.



TS200 CM The reverse side of the control module has the following
(7) A DIP switch used to adjust node numbers and bus transfer rate
(8) Three green LEDs for monitoring
(9) Connection for the key-operated switch
(10)Socket for the AT keyboard
(11)D-Sub-9 plug connector for the bus connection
(12)A fine-wire fuse (1 A, T type)
(13)Connection for HF earthing






Technical data

Display
active surface
size of display
size of characters
backlighting
 Liquid crystal display, dot matrix
127mm x 34mm
8 rows x 40 characters
5x7 dots
LED, green
Acoustic alarm Sound frequency 2,300Hz
User buttons
Lighting
 Membrane keyboard with short-stroke keys
LED, yellow
Keyboard requirement
Connection
Keyboard
Layout
Current consumption
DIN plug connector, 5-pole
101/102 keys AT keyboard
SG, GR, US, SF
urrent consumption < 275 mA
Key-operated switch
Input voltage:
Released for operation
Locked for operationt
limit 1)
nput current (at +24V DC)
Passive, digital input

0 VDCNOM (< +5 VDC)
+24 VDCNOM (> +14 VDC)
-36 .. +36 VDC
< 6 mA
Bus connection CAN (ISO 11898)
Supply voltage UB
operating range
limit 1)
max. power consumption
 24 VDCNOM
+18 to + 36 VDC
-36 to +36 VDC
10 W
Electric isolation
Supply/logic, bus key
Soperated input/logic, bus
yes
yes
Ambient temperature
operating
storage
0 to +50 °C
-20 to +60 °C
Protection category
With front seal (optional)
 IP 20
IP 65
Dimensions of front panel cutout

 B: 186 mm (+1.1, -0),
H: 92 mm (+0.8, -0)
Dimensions
 		192 x 72 x 96 mm
Weight 900 g





Downloads