		Description Technical data Schematic Programming Dimensions Order overview Downloads
Rack Multi Control RMC

RMC Description

The Rack Multi Control, RMC, is a self contained system for supervising network and server racks. The RMC offers 8 digital and 4 analog inputs as well as 3 potential free outputs. The RMC can monitor temperature, humidity, smoke, moisture, intrusion and much more. Also, in combination with a keypad the RMC is able to perform access control to IT-Racks and Server rooms. After you have logged in on the RMC you can monitor the main page of the graphic user interface which is a virtual copy of the RMC. The top part shows the front of the RMC, below it lists the last 15 events. The GUI refreshes every 60 seconds or in case of an event. When an alarm is raised, notification can be sent to 5 recipients by Email or SMS and via SNMP Traps to a network management system.

The RMC was developed to be user friendly, easy to configure and have the ability of communication. The RMC can be attached to the network by Ethernet and configured in a web browser, therefore no additional software is needed. System status and alarm notifications are listed on the main page for easy view. The RMC is made to fit in a 19" cabinet and uses 1 unit size in height.

The RMC is despatched ready to use icluding a temperature sensor 0.2m cable, the connector set, the power cable and the mounting kit.

Technical data

The RMC alarms with	8 Alarm channels with red/green LED Text display Buzzer 2x Status LED
Number of delegates for E-mail and SMS-Messaging	5
Inputs	1 Analog / 3 Analog-Temperature / 8 Digital
Relay Outputs	2x 1A / 3x 5A
Housing	Steel, Powder coated RAL7035
Connections	Pug in screw terminals max. 1,5mm²
Supply voltage	230VAC
max. power consumption	20VA
Protection degree	IP40
Temperature range	-5°C to +45°C
Dimensions	1U 482.6 mm, (19") Rack mounted 115 mm depht
Weight	2410g

Schematic

1. Modem Interface RS232
2. Keypad Interface (Emka 2100)
3. Ethernet Port
4. Digitale Inputs
5. Analogue Inputs
6. Alarm and Door Output
7. Output Relays
8. Power Connector

Please click on the image for a larger view or go to the download of the wiring diagram sheet

Programming

The programming of the RMC is realized by a browser (Internet Explorer). After selecting the IP address, the login page is shown. The start page shows the actual status of the in- and outputs. Furthermore, the last 15 events are listed in the log section. All settings can now be easily realised under the position "settings".

View: Login

RMC

View: Start Page

RMC

View: Settings

RMC

Dimensions

Please click on the drawing for a larger view.

Order overwiev

Part number	Picture	Description	Shop
901-0101		Rack Multi Control inclusive power cable, connectors, temp. sensor RMC 0.2 m, installation set
901-0120		Temperature Sensor RMC 0.2 m
901-0121		Temperature Sensor RMC 3 m
SWM5		Water/Oil sensor 5mm with 5m cable, 1 relay contact NC 24VAC/DC
901-0109		Magnetic door contact
901-0126		Installation Set: 4 screws/nuts