		Description Programming Technical Data Wiring Diagram View / Dimensional Drawing Order Overview Downloads
Fault Indicator LSH08

LSH08 Description

Function

The LSH08 is an 8-channel fault indicator for DIN rail mounting.
It offers integrated control elements for horn acknowledgement, message acknowledgement and lamp test.
The built-in buzzer can be deactivated if required. Each input can be individually switched between normally open (NO) and normally closed (NC).
A common delay can be activated for all fault inputs.
The signalling mode can be configured as new-value, first-up or common alarm.
Additional functions include automatic alarm acknowledgement after device start-up or collective outputs for priorities 1 and 2.
Labelling is done simply using an insert strip.
All settings, such as LED colour selection or input mode switching between NO/NC,
can be made either via the web interface (browser) or using the control buttons on the device front.
The device is connected via push-in terminals.

System Integration

In addition to functioning as a local fault indicator, the LSH08 can be integrated into higher-level systems.
The connection is made via a network. Depending on the application, an outgoing internet connection may be required.
The LSH08 can be used as a universal input module for IoT systems and PLC controllers via MQTT or Modbus UDP.
The LSH08 also supports the APSdg protocol and can be used as an IO module for the APS Alert Cloud AAC and the APS TS400 alarm server.
Remote access and maintenance are ensured via APS-TribeRelay connection at no additional cost.

Interface integration of fault indicator LSH08

Interface integration of fault indicator LSH08

LSH08 Programming

Programming of the LSH08 fault indicator is carried out either via the web interface or using the control elements on the front of the device.

View of the programming in the web interface:

Programming of the fault indicator LSE-D16-BS

Programming of the fault indicator LSE-D16-BS

The use of the web interface is described in a separate document, see Downloads.

Parameter setting via the control elements on the front of the LSH08 takes place in four programming levels:

1. Inputs: Switching between NO and NC
2. Virtual DIP switch: Settings for delays, buzzer on/off, signalling mode, automatic alarm acknowledgement, and output modes
3. Assignment of inputs to collective output priority 2
4. RGB colour setting of fault inputs
Levels 3 and 4 are deactivated by default. They can be activated on level 2 via DIP switch 15.

Technical Data

Designation	LSH08 Fault Indicator
Article Number	LSH08
Signalling Mode	New-value, first-up or common alarm
Indication	8 multicolour LEDs / integrated buzzer
Fault Inputs	8 inputs, NO/NC configurable
System Inputs	3 external lamp ack LQ, horn ack HQ and lamp test
Signal Outputs	8 relay contacts in two groups
System Outputs	3 horn output to HQ / collective output P1 / collective output P2
Optional Output Functions	Button press HQ + LQ / collective prio 1+2
Switching Capacity Output Relays	6A 30VDC / 6A 250VAC
Delay Virtual DIP Switch	5s/10s/60s uniform for all fault inputs
Delay in Web Interface	1s to 48h individually per fault input
Automatic Alarm Acknowledgement	5s/10s/60s uniform
NO/NC	All fault inputs individually switchable
Control Elements	Horn / Message acknowledgement / Lamp test
Operating Voltage	8–30VDC / 12–28.5VAC, 40–80Hz
Signal Voltage	24V AC/DC ±20%
System Input Voltage	According to operating voltage range
Protocols	APSdg / MQTT / Modbus-UDP
Power Consumption	Max. 4.5W
Weight	210g
Dimensions WxHxD without connector	106x91x58mm
Dimensions WxHxD incl. connector	106x122x58mm
Terminals	Push-in terminals 0.2–1.0mm²
Mounting Position	Any
Protection Class	IP20
Mounting	35mm DIN rail
Temperature Range	0°C to +65°C

Wiring Diagram

Dimensional Drawing

Order Overview

	Artikelnummer	Bezeichnung	Zusatz	Bestand^*1	Preis^*2
	LSH08	Störmeldesystem 24V DC/AC	8 Ein- und 8 Ausgänge, Multicolour-LED	8	447.00 CHF

^*1: Lagerbestände sind Richtwerte. Die Zuteilung erfolgt nach Bestelleingang.

^*2: Preise sind nicht verbindlich, Irrtum ist vorbehalten.