		Description Programming Technical data Schematic Dimensions Order overview Downloads Link to predecessor model AS-D16
LSE-D16-AB Indicator unit

LSE-D16-AB Description

Funtion

The indicator unit LSE-D16-AB is used for the collective signalling of operating states. It has 2x 16 multicolour LEDs and is installed in the front of machines or control cabinets. A buzzer is also integrated which can be activated externally via a system input. Lamp test on the front as well as additional control elements for integration into a higher-level system complete the functionality.
All settings, such as the selection of the LED colours or the switching of the inputs between normally closed and normally open, are made via the push buttons on the front of the unit. The labelling is simply done with slide-in paper strips. The connection is made via plug-in screw terminals on the back of the device.

System Integration

In addition to its function as a local indicator unit, the LSE-D16-AB can be integrated into higher-level systems.
The connection is established via the network, and depending on the application, an outgoing internet connection may be required.
The LSE-D16 can be used as a universal input module for IoT systems and PLC controllers via MQTT or Modbus UDP.
The LSE-D16 also supports the APSdg protocol and can function as an I/O module for the APS Alert Cloud AAC and the APS TS400 alarm server.
Remote access and maintenance are ensured at no additional cost via the APS TribeRelay connection.

Schnittstellenintegration Störmelders LSE-D16-AB

Schnittstellenintegration Störmelders LSE-D16-AB

The LSE-D16-AB indicator unit is the replacement for the AS-D16 indicator unit. The functionality, size, parameterisation are identical.

LSE-D16-AB Programming

The programming of the LSE-D16-AB is carried out either with the web interface or the buttons in the front of the unit.

View of the programming in the WEB interface:

Programming indicator unit LSE-D16-AB

The use of the web interface is described in a separate documentation, see Downloads

The parameterisation with the buttons on the front panel of the LSE-D16-AB has 6 programme levels:

1. Inputs Group 1 (red): Normally open / closed switchover
2. Inputs Group 2 (green): Normally open / closed switchover
3. Virtual DIP switch: time delays and system settings
4. Activation of the LT output as a common output priority 2
5. RGB colour setting of inputs group 1
6. RGB colour setting of inputs group 2

Levels 4 to 6 are deactivated in the delivery state. They can be activated in level 3 with the DIP switch 16.

Technical data

Designation	LSE-D16-AB Display Module
Part Number	LSE-D16-AB
Signalling	16 Multicolour LEDs / Integrated Buzzer
Protocols	APSdg / MQTT / Modbus-UDP
Communication	2x 16 multicolour LED's / integrated buzzer
Indicator inputs	16 inputs NO/NC for each group 1 + 2
System inputs	Buzzer / Lamp test / HQ Lamp / LQ Lamp
Switching capacity output relays	6A 30VDC / 6A 250VAC
Factory Default Output Relay	Image of the buttons HQ/LG/LT
Alternative Output Relay Function	Collective Output / Collective Output Priority 2
Control elements	Buzzer ack. / Alarm ack. / Lamp test
Supply voltage	8-30VDC / 12-28.5VAC, 40-80Hz
Signal voltage	24V AC/DC ± 20%
Power consumption	Max. 3W
Weight	260g
Dimensions WxHxD	72x144x75mm
Front panel cut out	138x68mm
Terminals	Plug-in screw terminals 0.2 - 2,5mm2
Mounting position	Any
Protection degree housing	IP40
Protection degree connector	IP20
Temperature range	0°C to 65°C

Schematic

Dimensions

H	B	H1	B1	ET	T1	T2
144 mm	72 mm	136 mm	65 mm	75 mm	52 mm	8.5 mm

Order overview

	Artikelnummer	Bezeichnung	Zusatz	Bestand^*1	Preis^*2
	LSE-D16-AB	Anzeigebaustein 24V DC/AC	2x 16 Eingänge, Multicolour-LED	6	395.00 CHF

^*1: Lagerbestände sind Richtwerte. Die Zuteilung erfolgt nach Bestelleingang.

^*2: Preise sind nicht verbindlich, Irrtum ist vorbehalten.