Temperature Converter PXT-10/11

		Description Features Block diagram Schematic View Technical data Order overview / Versions Downloads
Temperature Converter PXT-10/11

Description

Temperature converter for converting a temperature to an analogue process signal. The temperature converter has an Pt100/Pt1000 input in two ranges -50-300°C and -50-100°C. A typical application is where temperature measurement is required and when a PLC/ Controller only has analogue inputs. The temperature range for input and type of analogue output are selected via choice of terminal - see connection diagram.

Features

- Pt100/Pt1000 probe input with/without compensation for cable resistance in two ranges -50 to 300°C and -50-100°C
- Output 0-10VDC/0-20/4-20mA - selected via terminals
- Output offset and gain adjustable ±5%
- LED indication of input less than 5%
- Galvanically isolated supply/output is 3,75kV AC 1 min
- Operating voltage 24VDC, 24VAC, 115VAC or 230VAC

Block diagram

Schematic

View / Size

Technical data

Input signal	Pt100/Pt1000 probe (DIN43760/IEC751) 2 or 3 wire with compensation for cable resistance
Temperature range	-50-300°C -50-100°C
Output (selected via terminals)	4-20mA DC 500 Ohm 0-20mA DC 500 Ohm 0-10V DC via intern 500 Ohm shunt
Linearity	lower than 0,05% of full scale.
Mounting	35mm DIN-rail
Terminals	Screw terminals up to 2x 2.5mm²
Supply voltage	Version 924= 24VDC (20.4-27.6V DC) Version 024= 24VAC (20,4-27,6V AC) Version 115= 24/115VAC(20.4-27.6/98-132VAC) Version 230= 24/230VAC(20.4-27.6/196-264VAC
Frequency	45-66 Hz
Power consumption	AC: 3VA / DC: 2W
Electric isolation	3.75kVAC
Temperature range	-20 - +55°C
Protection degree	IP 20
Weight	170g

Order overview / Types

Standard Stock Types

Part number	Image	Description	Shop
PXT-10.924		Signal Converter PXT-10.924 / Input: PT100 / Output: 4-20mA, 0-20mA, 0-10V / Supply Voltage 24VDC
PXT-10.230		Signal Converter PXT-10.230 / Input: PT100 / Output: 4-20mA, 0-20mA, 0-10V / Supply Voltage 24 - 230VAC